API Oil Well Drilling Equipment Float Guide Shoe Price

• Manufacturing Process: Forging
• Surface Treatment: Spray-Paint
• Operation Pressure: Atmospheric Pressure
• Material: Cast Steel
• Size: 9 5.8
• Thread: Btc
• Model NO.: 9 5/8
• Length: 500
• Side Holes: Yes
• Material Grade: N80
• Transport Package: Wooden Case
• Specification: 6 5/8
• Trademark: MED
• Origin: China
• Production Capacity: 100

Product Description

 

API Oil Well Drilling Equipment Float Guide Shoe Price

The material of the Float Shoe body is the alloy steel . The upper end of the Float Shoe is connected with casing and its lower end is connected with the semilunar cement head. You can use the guide casing to lead it into the drilling hole. There is a back-pressure valve in the Float Shoe. You can use the oil well cement to fill the area between the Float Shoe and the body. The back-pressure can be cut by back-pressure valve. The upper hole and the lower hole will be open when the products after done . After the pressure of the circulating mud press the Valve Head into the lower place, the three collar valve on the valve tail will fall down automatically. The valve will press the valve seat tightly at the function of spring after the cement injection. And it will as a one-way valve function in the working. At that time, you could inject the mud into the pump from the upper end to the lower end, but the liquid of the well won`t be back in the casing below the valve or the outside circulation area of the casing.
 

 Float Collar and Float Shoe,

Like the FC Float Collar, the FS float shoe also has a back-pressure valve to prevent back flow. It permits cement to run through side ports when the nose of the shoe is on the bottom. Inner valve and bottom guides are all made of drillable material. Its capability of back-pressure is over 25MPa.

Specifications

Φ508,Φ339.7,Φ273,Φ244.5,Φ177.8,Φ139.7,Φ127,Φ114.3,Φ101.6,Φ88.9

20",13.3/8",10.3/4",9.3/8",7",5.1/2",5",4.1/2",4",3".1/2"

 

FY GUIDE SHOE

 

PDC bit drillability. An alternative cast aluminum nose in sizes 3½" through 20".

 

Features:

1. All inner parts are made of easily drillable aluminum alloy.

2. The device can be connected directly to the casing of the same type.

3. Reliable back-pressure leak proof structure, enable grout or slurry flow with less resistance.

4. Valve seat and valve disk can effectively prevent grout from flowing back.

5. Non-rotating landing plate is available on request.

6. Either PDC or rock bit drillable.



About Us
Zhengzhou Maierda Petroleum Equipment Co., Ltd. is a manufacturer and supplier of casing accessories, cementing tools and downhole tools. Our factories have many years experiences of manufacturing oilfield equipment and accessories. We have over 10 years importing & exporting experiences in oil & gas industry.
Our main products:
1. Casing centralizers: bow spring centralizers, rigid centralizers, semi-rigid centralizers, one piece centralizers, polymer centralizers, hollow vane centralizers, aluminum centralizers, roller centralizers, slip on centralizers, hinged centralizers, welded/non-welded centralizers, stop collars, etc.
2. Cementing tools: float equipment (float collar, float shoe, guide shoe), cementing plugs, cement baskets, cement heads, stage collars, etc.
3. Downhole tools: casing & tubing couplings, pup joints, sucker rod guides (centralizers), sucker rods, drill collars, etc.
We are committed to providing high-quality and cost-effective products and services to our customers in oilfield industry.
Hope to establish a long-term partnership with you!